diff --git a/root/etc/default/smartmontools b/root/etc/default/smartmontools
new file mode 100644
index 0000000..6a8a6e2
--- /dev/null
+++ b/root/etc/default/smartmontools
@@ -0,0 +1,9 @@
+# Defaults for smartmontools initscript (/etc/init.d/smartmontools)
+# This is a POSIX shell fragment
+
+# List of devices you want to explicitly enable S.M.A.R.T. for
+# Not needed (and not recommended) if the device is monitored by smartd
+#enable_smart="/dev/hda /dev/hdb"
+
+# uncomment to pass additional options to smartd on startup
+#smartd_opts="--interval=1800"
diff --git a/root/etc/smartd.conf b/root/etc/smartd.conf
new file mode 100644
index 0000000..7c80e21
--- /dev/null
+++ b/root/etc/smartd.conf
@@ -0,0 +1,149 @@
+# Sample configuration file for smartd.  See man smartd.conf.
+
+# Home page is: http://www.smartmontools.org
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices.  DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found.  Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+DEVICESCAN -d removable -n standby -m root -M exec /usr/share/smartmontools/smartd-runner
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First ATA/SATA or SCSI/SAS disk.  Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/sdb -H -l error -l selftest -t -I 194
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check.  Only report SMART health status if it fails
+# But send an email in this case
+#/dev/sdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks.  This will monitor everything that smartd can
+# monitor.  Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4, 
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED.  Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+# On FreeBSD /dev/tws0 should be used instead
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+#
+# Monitor 2 disks connected to the first HP SmartArray controller which
+# uses the cciss driver. Start long tests on Sunday nights and short
+# self-tests every night and send errors to root
+#/dev/sda -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
+#/dev/sda -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am. 
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+#   -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+#   -T TYPE set the tolerance to one of: normal, permissive
+#   -o VAL  Enable/disable automatic offline tests (on/off)
+#   -S VAL  Enable/disable attribute autosave (on/off)
+#   -n MODE No check. MODE is one of: never, sleep, standby, idle
+#   -H      Monitor SMART Health Status, report if failed
+#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
+#   -f      Monitor for failure of any 'Usage' Attributes
+#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
+#   -M TYPE Modify email warning behavior (see man page)
+#   -s REGE Start self-test when type/date matches regular expression (see man page)
+#   -p      Report changes in 'Prefailure' Normalized Attributes
+#   -u      Report changes in 'Usage' Normalized Attributes
+#   -t      Equivalent to -p and -u Directives
+#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
+#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
+#   -i ID   Ignore Attribute ID for -f Directive
+#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
+#   -C ID   Report if Current Pending Sector count non-zero
+#   -U ID   Report if Offline Uncorrectable count non-zero
+#   -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+#   -v N,ST Modifies labeling of Attribute N (see man page)
+#   -a      Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+#   -P TYPE Drive-specific presets: use, ignore, show, showall
+#    #      Comment: text after a hash sign is ignored
+#    \      Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices.
+# DEVICESCAN may be followed by any desired Directives.